Nissan Pathmaker OneTon SAS Build – Part 6

Nissan Pathmaker OneTon SAS Build – Part 6

The Nissan Pathmaker OneTon SAS Build – Part 6 – Flatbelly and the BBQ

Now its time to bust out the grinders and welder again and get back into the heavy metal fab and heavy is the way it turned out! I had pulled the 3″ body lift out of my rig Continue reading →

Posted by Pathmaker in The Nissan Pathmaker Build Blog, 0 comments
Nissan Pathmaker OneTon SAS Build – Part 5

Nissan Pathmaker OneTon SAS Build – Part 5

The Nissan Pathmaker OneTon SAS Build – Part 5 – Case’s N Such

I tackled the easy stuff and avoided doing a bunch of the difficult things. Now I had a bunch of head scratcher things at the same time. First on the list was figuring out the NWF TX-10 to Dana 300 adapter. Continue reading →

Posted by Pathmaker in The Nissan Pathmaker Build Blog, 0 comments
Nissan Pathmaker OneTon SAS Build – Part 4

Nissan Pathmaker OneTon SAS Build – Part 4

The Nissan Pathmaker OneTon SAS Build – Part 4 – Getting Suspenseful

Now we are getting into a bit more exciting stuff. It wasn’t time to make vroom vroom noises yet but it sure was nice to start moving parts back into the shop. Continue reading →

Posted by Pathmaker in The Nissan Pathmaker Build Blog, 0 comments
Nissan Pathmaker OneTon SAS Build – Part 3

Nissan Pathmaker OneTon SAS Build – Part 3

The Nissan Pathmaker OneTon SAS Build – Part 3 – Rust Bucket

Anyone with a first gen Nissan knows they’re prone to rusting under the rear seats and floor area. Trapped moisture under carpets as well as splash from below means that there was some decent sized holes Continue reading →

Posted by Pathmaker in The Nissan Pathmaker Build Blog, 0 comments
Nissan Pathmaker OneTon SAS Build – Part 2

Nissan Pathmaker OneTon SAS Build – Part 2

The Nissan Pathmaker OneTon SAS Build – Part 2 – De-Bracketry

After finally buying a house in the red-hot housing market of 2008 as a 24 year old the finances were tight as you can imagine. The house came with a carport and I had the carpentry skills to build a small but serviceable shop that would let me finally start my SAS Continue reading →

Posted by Pathmaker in The Nissan Pathmaker Build Blog, 0 comments
Nissan Pathmaker OneTon SAS Build – Part 1

Nissan Pathmaker OneTon SAS Build – Part 1

The Nissan Pathmaker OneTon SAS Build – Part 1 – Origins

After 17 years of owning my truck as of this writing I figure it was time to go back and post up some of my Nissan knowledge for those that are just getting into the small world of heavily modified Nissans. Continue reading →

Posted by Pathmaker in The Nissan Pathmaker Build Blog, 1 comment
Mild Moab Toyota’s

Mild Moab Toyota’s

Mild Moab in the Toyota’s

After many trips to Moab in the buggies and the rock crawlers, it was time to do things differently. Instead of spending an entire day to climb three miles up some crazy canyon this trip was about Moab Rock crawling Toyota’s and low-difficulty expedition-style wheeling.  Continue reading →

Posted by Pathmaker in Back Country Trail Wheeling, 0 comments
EMB Memorial Buggy Shakedown Run

EMB Memorial Buggy Shakedown Run

EMB Memorial Buggy Shakedown Run

Our good friend Erick McBride passed away in Oct 2007. At the time he had most of the parts for a buggy and big plans. It took us a lot longer than planned but it’s finally out on the trail. This was the first real shakedown run in the EMB Memorial Buggy. Continue reading →

Posted by Pathmaker in Back Country Trail Wheeling, 0 comments