With the rain pouring down and all the boys busy I hopped into the Pathmaker rig with Mrs. Pathmaker and we headed to the Heights to cut some more new trails on the property. With the plan for a casual day of wheeling quickly going sideways it turned into the usual sort of show, some winching, some redline and a lot of fun out in the yard!
pathmaker
New Trails at Pathmaker Heights!
We’ve been cutting new trails in the yard at Pathmaker Heights and it was time to share with the boys and have them out for a day of rock crawling. Continue reading →
Bush Trail
New Trail? Sounds like a great idea!
It was time for another day of back country trail wheeling and bbqing with the boys so we got together at Jim’s house again before heading out into the woods. With cloudy skies but dry rocks it was looking like it would be a good traction sort of day. Continue reading →
Team No Stickies
Team No Stickies made it out for a day of Full Body Rig Rock Crawling
With some wet weather in the month of September signalling the start of wheeling season we got together for some back country wheeling with Team No Stickies. Continue reading →
Ford Taurus E-Fan Install – Pathmaker Speed Shop
Two Speed Ford Taurus Electric Fan Upgrade
With my knuckles back on the Pathmaker Rig it was time to shift from “need to” projects to a few “want to” projects. The PSC Full Hydro steering on my rig has been working great for me, except that my pump likes to get nice and hot and whine after some hard use.
Windshield Install – Pathmaker Speed Shop
Nissan Pathmaker Windshield Install
It was finally time to get around to installing the windshield that I pulled out of the Project Cheapfinder in a previous BLOG POST and toss it into the Pathmaker rig. Never having done it before this was going to be an interesting learning experience for me. My good friend Rich owns a glass shop in Kamloops BC Family Glass and he gave me a few pointers on what I should do. Of course I completely forgot everything he said right away so any screw ups are definitely my fault! Continue reading →
Dana 60 Knuckle Gusset Install – Pathmaker Speed Shop
Dana 60 Kingpin Knuckle Gusset Weld On Kit
After snapping my knuckle in half during my last wheeling trip. Getting a spare one brought out to me by my buddy Jon and limping my rig home. Back in the shop I pulled the front axle apart and noticed that of course the drivers side knuckle had some huge cracks in it. Looks like I was very close to breaking a second time on one trip! Continue reading →
Trailer Pipe Fender Scabrication – Pathmaker Speed Shop
Custom Trailer Pipe Fenders
My rusty old fenders decided that they had had enough, finally crumpling, pushing into the sidewalls of two of my brand new trailer tires, (literally first tow) which in turn destroyed the sidewalls of the tires and prompted a trailer fender rebuild.
My rig is fat, real fat. It doesn’t fit between the wheel wells of my trailer. Which means that every time I load my rig I have to drive one tire up and over the fenders. I get to choose the side but I’ve got to pick one. Over the years that has crushed my rusty old fenders. So it was time to cut the old fenders off, grab a few sticks of pipe and bend up a few bars. Then I can drive over the bars which will take the weight a lot better, plus if I’m smart I’ll be able to reuse the old steel from the old fenders because I’m cheap and buying new metal is expensive! Continue reading →
Pathmaker Traction Day Rock Crawling
Traction Day rock crawling in the Nissan Pathmaker
Went out wheeling on the day before my Birthday with a couple of buddies on a day I’ve now termed “Traction Day.” Traction might be something you have where you wheel but it’s not something we have very often around here. Continue reading →
Snow Wheelin Round Two – Toyota Buggy Time
Snow Wheelin Toyota Buggies
After heading out snow wheelin last week, it was time to head out with the EMB Buggy and a couple more of the built Toyota’s for another Trail Wheelin trip. Continue reading →
Project CheapFinder Part 4 – Trail Prep
Snow Wheelin in the Tacoma
Toyota Tacoma Snow Wheelin
While still waiting on some parts for the Pathmaker (the joys of living on an island!) and it being too cold and crappy outside for me to work on the CheapFinder I got a call from my buddy Dan who asked me to come out for a bit of snow wheeling on some local trails Continue reading →