sas pathmaker

Nissan Pathmaker One Ton SAS Build Walk Around

Nissan Pathmaker One Ton SAS Build Walk Around

Nissan Pathmaker One Ton SAS Build Walk Around

I had the Nissan Pathmaker out at the Frogstompers Funday Toydrive and decided I should do an updated walkaround to go over where my rig sits now.  Since my last blog post and first shakedown run which took place in 2012. Continue reading →

Posted by PathmakerProductions in Buggy Walkarounds, Pathmaker Speed Shop, The Nissan Pathmaker Build Blog, 1 comment
Nissan Pathfinder VG30 Head Gasket Replacement

Nissan Pathfinder VG30 Head Gasket Replacement

Nissan VG30 Head Gasket Replacement

After years of red line and forgetting to turn my Ford Taurus E-Fan on my Head Gasket was starting to go with a bit of oil showing up under the rad cap. Grabbing some new head gaskets off of RockAuto, as well as an assortment of other gaskets and seals that I may need along the way, including a timing belt I tore into the Pathmaker and got started. Continue reading →

Posted by PathmakerProductions in Pathmaker Speed Shop, The Nissan Pathmaker Build Blog, 4 comments
Nissan Pathfinder VG30i EFI Swap

Nissan Pathfinder VG30i EFI Swap

Nissan VG30i EFI Swap Part 2 – Bolting up the EFI

In the last post we removed all the parts for the MPFI swap from our donor 1995 Nissan Pathfinder “The Cheapfinder.” Now the time has come to put the Pathmaker Rig under the knife and pull off all the TBI parts so I can bolt up the parts off the 95.
The list of parts you need to remove is essentially identical as in Part 1 so head over there for all the details and we’ll pickup this from a torn down VG30i. Continue reading →

Posted by PathmakerProductions in Pathmaker Speed Shop, The Nissan Pathmaker Build Blog, 0 comments
Nissan Pathfinder VG30E EFI Removal

Nissan Pathfinder VG30E EFI Removal

Nissan VG30i EFI Swap Part 1 – Stripping the ’95

It was finally time to tear apart the 1995 Nissan Cheapfinder project and get the EFI stuff off the engine before sending it to the scrapyard to get turned into a cube. The reason for the effort and the reason you’re likely reading this is to do an EFI Swap on your Nissan Pathfinder or Hardbody with the VG30i Throttle Body engine. Since the Pathmaker rig is a 2dr 1987 Pathfinder it sports the old VG30i and it was time for an upgrade.
Why go thru the effort you may ask? “Free” Horsepower! Continue reading →

Posted by PathmakerProductions in Pathmaker Speed Shop, The Nissan Pathmaker Build Blog, 0 comments