Decal Application Instructions
Follow these steps to get a clean, professional install on your decal.
Every order includes printed instructions, but you can also follow along here.
—
Video Guide (Recommended)
If you’re installing a larger banner decal, watch this first:
—
Before You Start
- Apply in a clean, dry environment
- Surface must be smooth and free of dirt, wax, or grease
- Avoid installing in extreme cold or direct sunlight
—
How to Apply Your Decal
- Clean the surface thoroughly and let it dry
- Position the decal and use tape to hold it in place
- Peel off the backing while keeping the decal aligned
- Apply the decal using firm, even pressure
- Smooth out air bubbles as you go
- Carefully remove the transfer tape
—
Banner Decal Tips
- Take your time—large decals are easier with two people
- Work from one side to the other to avoid bubbles
- Use light pressure first, then go back over it firmly
—
Removal
To remove your decal:
- Use a hair dryer or heat gun to warm the vinyl
- Peel slowly from one edge
- Do not use a razor blade on painted surfaces
Decals are not reusable once removed.
—
Important Notes
- Decals are safe for properly maintained paint
- We are not responsible for damage to peeling or failing surfaces
- Installation results depend on surface condition and technique
—
Need Help?
If you have questions about your install, contact me here:
—