nissan sas

Nissan Pathmaker One Ton SAS Build Walk Around

Nissan Pathmaker One Ton SAS Build Walk Around

Nissan Pathmaker One Ton SAS Build Walk Around

I had the Nissan Pathmaker out at the Frogstompers Funday Toydrive and decided I should do an updated walkaround to go over where my rig sits now.  Since my last blog post and first shakedown run which took place in 2012. Continue reading →

Posted by PathmakerProductions in Buggy Walkarounds, Pathmaker Speed Shop, The Nissan Pathmaker Build Blog, 1 comment
Dana 60 Knuckle Gusset Install – Pathmaker Speed Shop

Dana 60 Knuckle Gusset Install – Pathmaker Speed Shop

Dana 60 Kingpin Knuckle Gusset Weld On Kit

After snapping my knuckle in half during my last wheeling trip. Getting a spare one brought out to me by my buddy Jon and limping my rig home. Back in the shop I pulled the front axle apart and noticed that of course the drivers side knuckle had some huge cracks in it. Looks like I was very close to breaking a second time on one trip!  Continue reading →

Posted by PathmakerProductions in Pathmaker Speed Shop, 0 comments
Windshield Install – Pathmaker Speed Shop

Windshield Install – Pathmaker Speed Shop

Nissan Pathmaker Windshield Install

It was finally time to get around to installing the windshield that I pulled out of the Project Cheapfinder in a previous BLOG POST and toss it into the Pathmaker rig. Never having done it before this was going to be an interesting learning experience for me. My good friend Rich owns a glass shop in Kamloops BC Family Glass and he gave me a few pointers on what I should do. Of course I completely forgot everything he said right away so any screw ups are definitely my fault! Continue reading →

Posted by PathmakerProductions in Pathmaker Speed Shop, The Nissan Pathmaker Build Blog, 0 comments
Ford Taurus E-Fan Install – Pathmaker Speed Shop

Ford Taurus E-Fan Install – Pathmaker Speed Shop

Two Speed Ford Taurus Electric Fan Upgrade

With my knuckles back on the Pathmaker Rig it was time to shift from “need to” projects to a few “want to” projects. The PSC Full Hydro steering on my rig has been working great for me, except that my pump likes to get nice and hot and whine after some hard use.

Continue reading →

Posted by PathmakerProductions in Pathmaker Speed Shop, The Nissan Pathmaker Build Blog, 0 comments